SGI Ethernet Card Guía de instalación descargar pdf (Pagina 22)

This section covers the following topics:

• Connecting the workstation to a C-brick console port.

• Connecting the workstation to a C-brick L1 port.

Connecting the Workstation to a C-brick Console Port

To connect the Silicon Graphics 230 visual workstation to the console port

on the SGI Origin 3200 server C-brick, follow these steps (see Figure 6):

1. Make sure the network settings are set to the following values:

• vt100

• Baud 38400

• No parity

• 8 data bits

• 1 stop bit

• Hardware ﬂow control on (rts/cts)

2. Power off the workstation and the SGI Origin 3200 server.

3. Connect a null modem serial cable from the workstation to the

console port on the C-brick (see Figure 6).

4. Power on the workstation.

Note: Ensure that you have write access to the ttyS0 device before

you complete the next step.

L3Con_Install.fm Page 22 Tuesday, February 27, 2001 8:01 AM

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 28

Sin comentarios

SGI Ethernet Card Guía de instalación Pagina 22