SGI Octane III Guía de usuario descargar pdf (Pagina 14)

2 007-5630-001

1: Introduction and Overview

Quick Setup Procedures

Use the information in the following subsections to get your Octane III unpacked, set up and

working in your office or lab environment. If your system ships with hardware, software or media

not listed in this guide, please see its accompanying documentation for installation instructions.

Unpacking the System

Open the SGI Octane III system packaging container and inspect all shipped items for evidence

of mishandling during transit. If the contents appear damaged, file a damage claim with the carrier

immediately.

Caution: To avoid personal injury when unloading the system, use two people when rolling the

system off the shipping pallet. The system can weigh up to approximately 178 pounds (81 kg).

Use the following steps and Figure 1-1 on page 3 to properly unpack your Octane III system:

1. After you have cut the package banding and opened the top, remove the wood ramp and

place it near the front of the pallet, then pull out and remove the two cushioned top pads.

2. Check that the following items are included and note that a DVD-RW drive and

monitor/keyboard/mouse may come as separately packaged options:

• SGI Octane III deskside system

• System power cords

• Silicon Graphics or 3rd party software CDs

• SGI Octane III Deskside Workstation User’s Guide (this document)

3. Remove any items packaged at the top of the box, then pull up the corrugated sleeve and lift

off the anti-static plastic cover.

4. Extract the two bolts that hold the front brace to the shipping pallet assembly and remove it.

5. Align the two bolt holes on the end of the ramp (removed in step 1) with the holes on the

front of the shipping pallet, then push the bolts into place to secure the ramp.

6. Use two people to slowly roll the Octane III system off the pallet and down the ramp.

7. Roll the system carefully into the operation location and position it for setup.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 77 78

Sin comentarios

SGI Octane III Guía de usuario Pagina 14