SGI Octane III Guía de usuario descargar pdf (Pagina 47)

Advanced Setup Configurations

007-5630-001 35

Power Button Function

If set to Instant_Off, the system will power off immediately as soon as the user hits the power

button. If set to 4_Second_Override, the system will power off when the user presses the power

button for 4 seconds or longer. The options are Instant_Off and 4_Second_Override.

Restore on AC Power Loss

Use this feature to set the power state after a power outage. Select Power-Off for the system power

to remain off after a power loss. Select Power-On for the system power to be turned on after a

power loss. Select Last State to allow the system to resume its last state before a power loss. The

options are Power-On, Power-Off and Last State.

Watch Dog Timer

If enabled, the Watch Dog Timer will allow the system to reboot when it is inactive for more than

5 minutes. The options are Enabled and Disabled.

Processor and Clock Options

This submenu allows the user to configure the Processor and Clock settings.

Ratio CMOS Setting

This option allows the user to set the ratio between the CPU Core Clock and the FSB Frequency.

Note: If an invalid ratio is entered, the AMI BIOS will restore the setting to the previous state.

The default setting depends on the type of CPU installed on the motherboard. The default setting

for the CPU installed in your motherboard is [21]. Press "+" or "-" on your keyboard to change

this value.

C1E Support

Select Enabled to use the feature of Enhanced Halt State. C1E significantly reduces the CPU's

power consumption by reducing the CPU's clock cycle and voltage during a "Halt State." The

options are Disabled and Enabled.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 77 78

Sin comentarios

SGI Octane III Guía de usuario Pagina 47