SGI Octane III Guía de usuario descargar pdf (Pagina 66)

54 007-5630-001

4: BIOS Information

Caution: Any cleared information is unrecoverable. Make absolutely sure that you no longer

need any data stored in the log before clearing the BMC Event Log.

Set LAN Configuration

Set this feature to configure the IPMI LAN adapter with a network address as shown in the

following graphics.

Channel Number - Enter the channel number for the SET LAN Config command. This is initially

set to [1]. Press "+" or "-" on your keyboard to change the Channel Number.

Channel Number Status -This feature returns the channel status for the Channel Number

selected above: "Channel Number is OK" or "Wrong Channel Number".

IP Address Configuration

Enter the IP address for this machine. This should be in decimal and in dotted quad form (i.e.,

192.168.10.253). The value of each three-digit number separated by dots should not exceed 255

as shown in the screen below.

Parameter Selector

Use this feature to select the parameter of your IP Address configuration.

IP Address

The BIOS will automatically enter the IP address of this machine; however it may be over-written.

IP addresses are 6 two-digit hexadecimal numbers (Base 16, 0 ~ 9, A, B, C, D, E, F) separated by

dots. (for example, 00.30.48.D0.D4.60).

Current IP Address in BMC

This item displays the current IP address used for your IPMI connection.

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 77 78

Sin comentarios

SGI Octane III Guía de usuario Pagina 66