SGI IS2224 Manual de usuario descargar pdf (Pagina 15)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Steps to Install – Storage Enclosure

620J Storage Enclosure Installation and Overview Guide 2-5

5 Attach the mounting rails to the cabinet by performing these substeps:

a Make sure that the adjustment screws on the mounting rail are loose so that

the mounting rail can extend or contract as needed.

Figure 2–3 Attaching the Mounting Rails to the Cabinet

1 Cabinet Mounting Holes

2 Adjustment Screws for Locking the Mounting Rail Length

3 Mounting Rails

4 Clip for Securing the Rear of the Storage Enclosure

b Place the mounting rail inside the cabinet, and extend the mounting rail until

the flanges on the mounting rail touch the inside of the cabinet.

c Make sure that the alignment spacers on the front flange of the mounting rail

fit into the mounting holes in the cabinet (Figure 2–4 on page 2-6).

The front flange of each mounting rail has two alignment spacers. The

alignment spacers are designed to fit into the mounting holes in the cabinet.

The alignment spacers help position and hold the mounting rail.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 45 46

Sin comentarios

SGI IS2224 Manual de usuario Pagina 15