SGI IS2224 Manual de usuario descargar pdf (Pagina 18)

Installing the Storage Enclosure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-8 620J Storage Enclosure Installation and Overview Guide

8 Secure the side of the storage enclosure to the mounting rails by performing these

substeps:

a Insert one M4 (8mm) screw through the side sheet metal of the storage

enclosure into the captured nut on the side of the mounting rail. Tighten the

screw.

b Repeat substep a for the other side.

9 Attach the plastic end caps onto the front of the storage enclosure. Notice that the

left end cap has holes so the LEDs can be seen through them after the left end cap

is attached to the storage enclosure (Figure 2–7).

a Put the top of the end cap on the hinge tab that is part of the storage enclosure

mounting flange.

b Gently press on the bottom of the end cap until it snaps into place over the

retainer on the bottom of the storage enclosure mounting flange.

Figure 2–7 Attaching the End Caps to the 620J Storage Enclosure

1 Hinge Tab

2 Retainer

96006-01

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 45 46

Sin comentarios

SGI IS2224 Manual de usuario Pagina 18