SGI IS2224 Manual de usuario descargar pdf (Pagina 20)

Installing the Storage Enclosure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-10 620J Storage Enclosure Installation and Overview Guide

3 To install the drive canister in the storage enclosure, place the drive canister on the

slot guides of the storage enclosure, and slide the canister all the way into the slot.

4 Rotate the drive canister handle down to lock the drive canister securely in place

(Figure 2–9).

Figure 2–9 Installing a Drive Canister in a Storage Enclosure

1 Drive Handle

Things to Know – Connecting Power Cords

• For each AC power connector on the storage enclosure, make sure that you use a

separate power source in the cabinet. Connecting to independent power sources

maintains power redundancy.

• To ensure proper cooling and assure availability, the storage enclosure always uses

two power supplies.

• You can use the power cords shipped with the storage enclosure with typical

outlets, such as a wall receptacle.

IMPORTANT Make sure that you do not turn on the power to the storage enclosure

until this installation and overview guide instructs you to do so. For the

correct procedure for turning on the power, see “Steps to Turn On –

Power” on page 4-1.

96007-01

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 45 46

Sin comentarios

SGI IS2224 Manual de usuario Pagina 20